View VNK10N06FM_55017.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VND10N06/VND10N06-1 VNP10N06FI/K10N06FM
"OMNIFET": FULLY AUTOPROTECTED POWER MOSFET
TYPE VND10N06 VND10N06-1 VNP10N06FI VNK10N06FM
s s s s s s s s s
V cl amp 60 60 60 60 V V V V
R DS(on ) 0.3 0.3 0.3 0.3
I lim 10 10 10 10 A A A A
3
3 2 1
LINEAR CURRENT LIMITATION THERMAL SHUT DOWN SHORT CIRCUIT PROTECTION INTEGRATED CLAMP LOW CURRENT DRAWN FROM INPUT PIN LOGIC LEVEL INPUT THRESHOLD ESD PROTECTION SCHMITT TRIGGER ON INPUT HIGH NOISE IMMUNITY
1
DPAK TO-252
IPAK TO-251
DESCRIPTION The VND10N06, VND10N06-1, VNP10N06FI and VNK10N06FM are monolithic devices made using SGS-THOMSON Vertical Intelligent Power M0 Technology, intended for replacement of standard power MOSFETS in DC to 50 KHz applications. Built-in thermal shut-down, linear current limitation and overvoltage clamp protect the chip in harsh enviroments.
3 1 2
ISOWATT220
SOT82-FM
BLOCK DIAGRAM (*)
() SOT82-FM Pin Configuration: INPUT = 3; SOURCE = 1; DRAIN = 2.
October 1997
1/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
ABSOLUTE MAXIMUM RATING
Symbol Parameter DPAK IPAK V DS V in I in ID IR V esd P to t Tj Tc T st g Drain-source Voltage (V in = 0) Input Voltage Input Current Drain Current Reverse DC O utput Current Electrostatic Discharge (C= 100 pF , R=1.5 K) Total Dissipation at T c = 25 C Operating Junction T emperature Case Operating T emperature Storage Temperature
o
Value ISOW ATT 220 Internally Clamped Internally Clamped 20 Internally Limited -15 4000 35 27 Internally Limited Internally Limited -55 to 150 9 SO T82-FM
Unit
V V mA A A V W
o o o
C C C
THERMAL DATA
DPAK/IPAK R t hj-ca se Thermal Resistance Junction-case Max R t hj-a mb Thermal Resistance Junction-ambient Max 3.5 100 ISOW AT T220 4.5 62.5 SO T82-FM 14 100
o
C/W C/W
o
ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) OFF
Symb ol V CLAMP VI L VI H V I NCL I DSS I I SS Parameter Drain-source Clamp Voltage Input Low Level Voltage Input High Level Voltage Input-Source Reverse Clamp Voltage Zero Input Voltage Drain Current (V in = 0) Supply Current from Input Pin Test Cond ition s I D = 200 mA I D = 100 A V in = 0 VDS = 16 V 3.2 -1 8 V in = V IL V in = V IL Vin = 5 V 150 -0.3 11 250 100 300 Min. 50 Typ . 60 Max. 70 1.5 Un it V V V V V A A A
R L = 27 V DD = 16 V V DS = 0.5 V I in = -1 mA I in = 1 mA V DS = 50 V V DS < 35 V V DS = 0 V
ON ()
Symb ol R DS( on) Parameter Static Drain-source On Resistance Vi n = 7 V Test Cond ition s ID = 1 A TJ < 125 C
o
Min.
Typ . 0.15
Max. 0.3
Un it
2/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
ELECTRICAL CHARACTERISTICS (continued) DYNAMIC
Symb ol C oss Parameter Output Capacitance Test Cond ition s V DS = 13 V f = 1 MHz Vin = 0 Min. Typ . 350 Max. 500 Un it pF
SWITCHING (**)
Symb ol t d(on) tr t d(of f) tf t d(on) tr t d(of f) tf (di/dt) on Qi Parameter Turn-on Delay Time Rise Time Turn-off Delay Time Fall T ime Turn-on Delay Time Rise Time Turn-off Delay Time Fall T ime Turn-on Current Slope Total Input Charge Test Cond ition s V DD = 16 V Id = 1 A R gen = 10 V gen = 7 V (see figure 3) V DD = 16 V Id = 1 A R gen = 1000 V gen = 7 V (see figure 3) V DD = 16 V Vi n = 7 V V DD = 12 V ID = 1 A R gen = 10 ID = 1 A V in = 7 V Min. Typ . 1100 550 200 100 1.2 1 1.6 1.2 1.5 13 Max. 1600 900 400 200 1.8 1.5 2.3 1.8 Un it ns ns ns ns s s s s A/s nC
SOURCE DRAIN DIODE
Symb ol V SD () t r r () Q r r () I RRM () Parameter Forward O n Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 1 A Test Cond ition s V in = V IL Min. Typ . 0.8 125 0.22 3.5 Max. 1.6 Un it V ns C A
I SD = 1 A di/dt = 100 A/s o Tj = 25 C V DD = 30 V (see test circuit, figure 5)
PROTECTION
Symb ol I lim t dl im () T jsh () T j rs () E as () Parameter Drain Current Limit Step Response Current Limit Overtemperature Shutdown Overtemperature Reset Single Pulse Avalanche Energy starting T j = 25 C V DD = 24 V V i n = 7 V R g en = 1 K L = 10 mH
o
Test Cond ition s Vi n = 7 V Vi n = 7 V V DS = 13 V V DS step from 0 to 13 V
Min. 6
Typ . 10 12
Max. 15 20
Un it A s
o
150 135 250
C C
o
mJ
() Pulsed: Pulse duration = 300 s, duty cycle 1.5 % () Parameters guaranteed by design/characterization
3/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
PROTECTION FEATURES During Normal Operation, the INPUT pin is electrically connected to the gate of the internal power MOSFET through a low impedance path as soon as VIN > VIH. The device then behaves like a standard power MOSFET and can be used as a switch from DC to 50KHz. The only difference from the user's standpoint is that a small DC current (typically 150 A) flows into the INPUT pin in order to supply the internal circuitry. During turn-off of an unclamped inductive load the output voltage is clamped to a safe level by an integrated Zener clamp between DRAIN pin and the gate of the internal Power MOSFET. In this condition, the Power MOSFET gate is set to a voltage high enough to sustain the inductive load current even if the INPUT pin is driven to 0V. The device integrates an active current limiter circuit which limits the drain current ID to Ilim whatever the INPUT pin Voltage. When the current limiter is active, the device operates in the linear region, so power dissipation may exceed the heatsinking capability. Both case and junction temperatures increase, and if this phase lasts long enough, junction temperature may reach the overtemperature threshold Tjsh. If Tj reaches T jsh, the device shuts down whatever the INPUT pin voltage. The device will restart automatically when Tj has cooled down to Tjrs
4/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
Thermal Impedance For DPAK / IPAK Thermal Impedance For ISOWATT220
Thermal Impedance For SOT82-FM
Derating Curve
Output Characteristics
Static Drain-Source On Resistance vs Input Voltage
5/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
Static Drain-Source On Resistance Static Drain-Source On Resistance
Input Charge vs Input Voltage
Capacitance Variations
Normalized Input Threshold Voltage vs Temperature
Normalized On Resistance vs Temperature
6/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
Normalized On Resistance vs Temperature Turn-on Current Slope
Turn-on Current Slope
Turn-off Drain-Source Voltage Slope
Turn-off Drain-Source Voltage Slope
Switching Time Resistive Load
7/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
Switching Time Resistive Load Switching Time Resistive Load
Current Limit vs Junction Temperature
Step Response Current Limit
Source Drain Diode Voltage vs Junction Temperature
8/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
Fig. 1: Unclamped Inductive Load Test Circuits Fig. 2: Unclamped Inductive Waveforms
Fig. 3: Switching Times Test Circuits For Resistive Load
Fig. 4: Input Charge Test Circuit
Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times
Fig. 6: Waveforms
9/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
TO-252 (DPAK) MECHANICAL DATA
mm MIN. A A1 A2 B B2 C C2 D E G H L2 L4 0.6 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 6.4 4.4 9.35 0.8 1 0.023 TYP. MAX. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 6.6 4.6 10.1 MIN. 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 0.252 0.173 0.368 0.031 0.039 inch TYP. MAX. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.260 0.181 0.397
DIM.
H
A
C2
C
DETAIL "A"
A1
L2
D DETAIL "A" B
=
=
3
B2
=
=
G
E
2
L4
1
=
=
A2
0068772-B
10/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
TO-251 (IPAK) MECHANICAL DATA
DIM. MIN. A A1 A3 B B2 B3 B5 B6 C C2 D E G H L L1 L2 0.45 0.48 6 6.4 4.4 15.9 9 0.8 0.8 0.3 0.95 0.6 0.6 6.2 6.6 4.6 16.3 9.4 1.2 1 0.017 0.019 0.236 0.252 0.173 0.626 0.354 0.031 0.031 2.2 0.9 0.7 0.64 5.2 mm TYP. MAX. 2.4 1.1 1.3 0.9 5.4 0.85 0.012 0.037 0.023 0.023 0.244 0.260 0.181 0.641 0.370 0.047 0.039 MIN. 0.086 0.035 0.027 0.025 0.204 inch TYP. MAX. 0.094 0.043 0.051 0.031 0.212 0.033
H C A C2 L2 D B3 B6 A1 L
= =
3
B5
B
A3
=
B2
=
G
=
E
L1
1
2
=
0068771-E
11/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
ISOWATT220 MECHANICAL DATA
DIM. MIN. A B D E F F1 F2 G G1 H L2 L3 L4 L6 L7 O 28.6 9.8 15.9 9 3 4.4 2.5 2.5 0.4 0.75 1.15 1.15 4.95 2.4 10 16 30.6 10.6 16.4 9.3 3.2 1.126 0.385 0.626 0.354 0.118 mm TYP. MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.015 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
A
B
L3 L6 L7 F1 F
D
G1
E
H
F2
123 L2 L4
P011G
12/14
G
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
SOT82-FM MECHANICAL DATA
mm MIN. A A1 b b1 b2 c D e E L L1 2.85 1.47 0.40 1.4 1.3 0.45 10.5 2.2 7.45 15.5 1.95 TYP. MAX. 3.05 1.67 0.60 1.6 1.5 0.6 10.9 2.8 7.75 15.9 2.35 MIN. 1.122 0.578 0.157 0.551 0.511 0.177 4.133 0.866 2.933 6.102 0.767 inch TYP. MAX. 1.200 0.657 0.236 0.630 0.590 0.236 4.291 1.102 3.051 6.260 0.925
DIM.
P032R
13/14
VND10N06/VND10N06-1/VNP10N06FI/VNK10N06FM
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. (c) 1997 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada- China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A . ..
14/14

▲Up To Search▲

Price & Availability of VNK10N06FM

	To Download VNK10N06FM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .